Safety Switch Won’t Turn On

safety-switch-four pole

Safety Switch Won’t Turn On

Please try these quick steps:

  1. Unplug every appliance in the home, garage and shed. This includes the refrigerator, dishwasher, range hood, outdoor central heating unit, kettle, toasters and all other electrical appliances around your home. IT IS VERY IMPORTANT that you remove the plug from the power point, not just switch off the power point at the switch with the 3 pin plug connected to the power point.
  2. Turn the safety switch ON after you have completed step 1. Plug in and then turn on each appliance, one at a time. The safety switch will trip off if a faulty appliance is plugged in and turned on.
  3. If your safety switch will not turn back on after step one is completed, you may have a fault in your wiring system. Contact United Electrical Services to assess the situation as the fault may be isolated to a particular circuit,
  4. You can also try to switch off all circuit breakers/fuses and turn the safety switch ON. Switch each circuit breaker on, one at a time. The safety switch will turn off when the faulty circuit is turned on. This will restore power to the area of the house without a fault, while you wait for your electrician.

Most faults with wiring or appliances will usually occur within 48 hours of the safety switch being installed. If you cannot find any faulty appliances or circuits after completing the above steps, please call our Office for further advice, this will be free of charge

Office – 03 8361 5889

Source : United Electrical Services

Summary
Safety Switch Won’t Turn On
Article Name
Safety Switch Won’t Turn On
Description
Unplug every appliance in the home, garage and shed. This includes the refrigerator, dishwasher, range hood, outdoor central heating unit, kettle, toasters and all other electrical appliances around your home
Author
Publisher Name
United Electrical Group
Publisher Logo

Follow me

Stephen Skec

Licensed Electrician at United Electrical Services
Licensed Electrician in Melbourne, Registered Electrical Contractor. Currently servicing Melbourne and surrounding suburbs I've been working actively in the electrical industry for 30 years and registered with Energy Safe Victoria.
Follow me
Rate article

3 thoughts on “Safety Switch Won’t Turn On”

Leave a Reply

Your email address will not be published. Required fields are marked *